CR16UUR bearing is Precision Cam-Follower Needle Roller Caged Bearing and Screw driver Slot and Rubber Sealed
Sizes: OD 1" x W 5/8" x Stud: 7/16" Inches
Match#: CF1PP, CF1SB.PP, CR16BUUR, CR-1B, CF1B, S32SW, CR1, CR16LLH, CRSBC16, CF-16-PPY, CCF1NS, CS-16S, CR16LL/3AS
Boundary Dimensions in mm | Mounting Dimension f Min. mm | Max Tightening torque | Basic Dynamic Load | Basic Static Load | |||||||||||||
D | C | d1 | G UNF | G1 | B | B1 | B2 | B3 | C1 | g1 | g2 | H | rs min | ||||
1 | 5/8 | 7/16 | 7/16-20 | 1/2 | 0.68 | 1 | 1/4 | 1/32 | 3/16 | 1/8 | 1/4 | 3/64 | 45/64 | 17.4 | 8810 | 10800 |
Cam Followers are studded bearings with needle bearings/Rollers inside a thick outer ring. They are available in caged, full compliment needles and Full compliment rollers variations and have either a Crowned or Cylindrical outer diameter. They can support high radial and axial loads arising from misalignment and skewed running and are suitable for cam drives, slide-ways, conveying equipment etc. The bearings are available in several designs and with or without an eccentric.
No posts found